Menu
Your Cart

We offer worldwide shipping by FedEx/UPS/DHL/EMS.

installation manual chevrolet cruze

Cruze Car GPS Navigation Entertainment System

Installation manual and cautions

Tools:

  1. Sleeve
  2. Plastic Crowbar
  3. 3M Electronic Tape
  4. 3M Double-side Tape
  5. Cotton Cloth
  6. Screwdriver 

Installation Steps:

1. Appearance of Cruze 2. Original interior trim 3. Pry the gear frame and pull out the frame by hands.
4. Screw out the bolts on the storage box and air conditioning panel, then take out the storage box. 5. Pry the original CD frma from the left and right bottom corner. 6. Screw out the four bolts and then take our the original CD player
7. Screw out the two bolts fixing original CD screen. Then take out the screen and air conditioning frame. 8. Screw out the four bolts fixing original CD Player and then take out the CD Player. 9.After that, arrange the wires and cables like GPS, USB etc and connect our power supply and radio adapted calbes. Then install our DVD Player.
10. While connect the wires of the screen, be careful not to mistake the PINS or the touched IC of the screen will burn out and the DVD Player will not able to set up. 11. Full set of special unit from the company. 12. After Installation

Inspection and Confirmation

Notice

  1. The installation requirements
    1. In order to ensure the safety and usage of the product, please commissioned by professional  technicians for installation. In addition, to avoid damage and accident, please do not disassemble the host privately.
    2. Before installation, please start the engine to check  the dashboard function display and button operation whether is normal; The car insdie and outside surface whether have the squandering phenomenon, please reflect to customers if have any problems.
    3. To prevent damage to the seat or interior trim, the installers should put down metal goods and other hard objects before installaion.
    4. To avoid squandering the car dashboard, please pay attention to put away the car components when install. in the same time, the wiring debris should be deal  with in time and don't stay in the car. Moreover, the cable joints must be insulated to prevent short circuits.
    5. The wire arrangement must be reasonable. Normally, the space for installaion is limited, it is recommended to reduce the unnecessary wirings to make the head unit easy to install and access. The cables and wirings to the head unit (e.g. GPS antenna, iPod cable, reversing camera cable, etc.) must be routed properly to avoid touching any moving parts, such as steering sheel column, acceleration pedal and brake pedal. All the cables must be bonded properly to against any loose during driving.
    6. To avoid damage the host or accessory, please don't disconnect the harness and accessory when the host turn on.
    7. If need to install the reverse camera, please enter into the setting menu to choose reverse power on.
  2. Navigation anteena position requirements 
    1. Please route the GPS antenna cable and power cable individually, and keep them away from the data cable to against any signal interference. THe GPS antenna is recommended to be installed on the roof for better signal reception, it can also be fixed inside the car such as lower part of the front windscreen with 3M double side sicky tape.
    2. To obtain better signal reception, the antenna must be positioned horizontally facing the sky. Any window tint may affect the GPS signal reception, it is recommended to cut the tint above the antenna off to get better GPS signal reception.
    3. After installaion, process the GPS positioning signal receiving adjustment.

Important warning: In order to avoid damage the map data, the map is prohibited to pull out when the map is in running.

  1. The host usage notice
    1. Please do not allow the screen to suffer the moisture, dust, vapor, smoke this pollution.
    2. Please do not use thinner or other chemical  cleaner to wipe the screen; customers should use soft cloth to wipe the dirt in the screen.
    3. To avoid damage the screen, please use the touch pen to  operate on a touch screen and can not use sharp objects to operate the host.